1. If the following conditions are found, the high-speed polishing machine shall not be used
The operator has not received professional training.
The operator has not learned the "safety operating procedures".
The high-speed polishing machine is not working properly.
2. Before using the high-speed polishing machine, the environment should be checked as follows
The operator's hands and feet should be kept away from the rotating polishing head.
The operator must not step on the power cord or wrap the power cord in the polishing head.
The operator must dress safely.
The polished area must not exceed the length of the power cord.
The operator shall not let go of the operating handle without authorization. When stopping, the handle must be released only after the high-speed polishing machine has completely stopped rotating.
Do not use a polishing pad with dust and dirt on it for polishing. When the polishing pad with too much fouling cannot be cleaned, it should be replaced in time.
When replacing and installing the polishing pad, the power must be cut off.
3. Storage of high-speed polishing machine
Cut off the power.
Tilt back and store on the rear wheels.
Do not store outdoors and should be stored in a dry place.
