1. Before use, clean the crushing cup and cup cover according to the cleaning and maintenance guidelines, and put the mill on a flat, clean and dry place for use.
2. Turn off the power, open the upper cover, put the dry material into the crushing cup of the mill, and close the upper cover tightly.
3. Plug in the power, turn on the timer switch, and set the time according to the hardness of different materials. You can also refer to the guide for crushing ingredients.
4. When the rolling sound is relatively uniform, it means that the material has been ground into powder, and the machine should be turned off.
5. Do not open the cup cover immediately after turning off the machine. Wait for a few seconds. After the cutter stops rotating, take out the crushing cup, then open the cup cover and pour out the crushed ingredients. Use a brush to clean the corners of the crushing cup.
